Related provisions for GENPRU 2.2.155
41 - 60 of 96 items.
A firm must calculate its group financial resources requirement as the aggregate of: (1) the sum of the financial resources requirements of all group entities within the scope of consolidation calculated in accordance with rule 14.5.2, except that: (a) requirements in respect of intra-group balances with other entities within the scope of consolidation should be excluded; and (b) [deleted](2) the sum of any adjustments that are made to each firm's
A firm may apply for a waiver of rule 14.5.1R, to permit a line-by-line approach to determine its group financial resources requirement. A firm should also demonstrate that calculating its requirement in this way does not result in a distortion of the group financial resources requirement.
(1) A firm may apply for an Article 129 permission or a waiver in respect of:(a) the IRB approach;(b) [deleted]55(c) the CCR internal model method; and(d) the VaR model approach.(2) A firm should apply for a waiver if it wants to:(a) apply the CAD 1 model approach; or2(b) apply the master netting agreement internal models approach; or2(c) disapply consolidated supervision under BIPRU 8 for its UK consolidation group or non-EEAsub-group; or2(d) apply the treatment in BIPRU 2.1
A firm is required under GENPRU 2.1.52 R (Calculation of the market risk capital requirement) to calculate its market risk capital requirement using the rules in BIPRU 7. However, the appropriate regulator may at the firm's request modify GENPRU 2.1.52 R to allow the firm to calculate all or part of the PRR for the positions covered by that model by using a CAD 1 model (for options risk aggregation and/or interest rate pre-processing) or a VaR model (value at risk model) instead.
The difference between the present values calculated using the firm's own yield curve and those calculated using the firm's curve shifted under BIPRU 7.9.47G are known as the sensitivity figures. Alternatively, a firm may shift the yield curve by one basis point and multiply up the sensitivity figures by the appropriate amount in order to achieve the shifts set out in BIPRU 7.9.47G. These sensitivity figures are then allocated to each of the 15 maturity bands set out in BIPRU
(1) The maturity of the credit protection and that of the exposure must be reflected in the adjusted value of the collateral according to the following formula:CVAM = CVA x (t-t*)/(T-t*)where:(a) CVA is the volatility adjusted value of the collateral as specified in BIPRU 5.4.28 R or the amount of the exposure, whichever is the lowest;(b) t is the number of years remaining to the maturity date of the credit protection calculated in accordance with BIPRU 5.8.3 R to BIPRU 5.8.5
(1) The maturity of the credit protection and that of the exposure must be reflected in the adjusted value of the credit protection according to the following formula:GA = G* x (t-t*)/(T-t*)where:(a) G* is the amount of the protection adjusted for any currency mismatch;(b) GA is G* adjusted for any maturity mismatch;(c) t is the number of years remaining to the maturity date of the credit protection calculated in accordance with BIPRU 5.8.3 R to BIPRU 5.8.5 R, or the value of
The liquid capital requirement for a firm subject to IPRU-INV 5.4.1R is:(i) for a firm whose permitted business includes establishing, operating or winding up a personal pension scheme, the higher of (A) £20,000, and (B) the calculation from IPRU-INV 5.9.1R;(ii) for any other firm, the higher of (A) £5,000 and (B), its total capital requirement calculated in accordance with IPRU-INV 5.4.12R.
A firm's total capital requirement is the sum of its:(a) expenditure based requirement calculated in accordance with IPRU-INV 5.10;(b) position risk requirement calculated in accordance with IPRU-INV 5.11;(c) counterparty risk requirement calculated in accordance with IPRU-INV 5.12 to 5.15;(d) foreign exchange requirement calculated in accordance with IPRU-INV 5.16; and(e) other assets requirement calculated in accordance with IPRU-INV 5.17.
For the purposes of cross product netting, the following are considered different product categories:(1) repurchase transactions, reverse repurchase transactions, securities or commodities lending or borrowing transactions;(2) margin lending transactions; and(3) financial derivative instruments.[Note: BCD Annex III Part 7 point (a) (part)]
A firm may recognise as risk-reducing the following types of contractual netting:(1) bilateral contracts for novation between a firm and its counterparty under which mutual claims and obligations are automatically amalgamated in such a way that this novation fixes one single net amount each time novation applies and thus creates a legally binding, single new contract extinguishing former contracts;(2) other bilateral agreements between a firm and its counterparty; and(3) a firm
An exempt CAD firm that carries on any regulated activity other than MiFID business must also have and maintain at all times financial resources calculated in accordance with the chapter of IPRU(INV) to which the firm is otherwise subject (Chapters 3 or 5) at least equal to the requirements set out in the relevant chapter (except that if the only designated investment business an exempt CAD firm is carrying on in addition to investment services
(1) An exempt CAD firm must, at all times, maintain a combination of professional indemnity insurance and own funds, (own funds to be calculated in accordance with (2)), at least equal to the requirements in this chapter for professional indemnity insurance and initial capital. (2) (a) If the exempt CAD firm is an investment management firm its own funds must be calculated in accordance with the rules in IPRU-INV 5.2 to 5.71.(b) If the exempt CAD
INSPRU 1.2.29R (4) requires firms7 to make allowance for any future annual bonus that a firm would expect to grant, assuming future experience is in line with the assumptions used in the calculation of the mathematical reserves. Final bonuses7 do not have to be taken into consideration in these calculations except in relation to accumulating with-profits policies7. The calculations required for accumulating with-profits policies are set out in INSPRU 1.2.71R (1). 6
INSPRU 1.2.71R (1) applies only to accumulating with-profits policies; INSPRU 1.2.71R (2) applies to any other type of policy, including non-profit insurance contracts. In INSPRU 1.2.71R (1)(a) a firm must take into consideration, for example, a market value adjustment where such an adjustment has been described in representations made to policyholders by the firm. However, any discretionary adjustment, such as a market value adjustment, must not be included in the amount calculated
(1) The value of unfunded credit protection (G) is the amount that the protection provider has undertaken to pay in the event of the default or non-payment of the borrower or on the occurrence of other specified credit events.(2) In the case of credit derivatives which do not include as a credit event restructuring of the underlying obligation involving forgiveness or postponement of principal, interest or fees that result in a credit loss event (e.g. value adjustment, the making
Where the protected amount is less than the exposure value and the protected and unprotected portions are of equal seniority - i.e.1 the firm and the protection provider share losses on a pro-rata basis, proportional regulatory capital relief is afforded. For the purposes of BIPRU 3.2.20 R to BIPRU 3.2.26 Rrisk weighted exposure amounts must be calculated in accordance with the following formula:(E-GA) x r + GA x gwhere:1(1) E is the exposure value; according to BIPRU 3.2.1 R
If the Part 4A permission of a firm contains a requirement obliging it to comply with this rule with respect to a third-country banking and investment group of which it is a member, it must comply, with respect to that third-country banking and investment group, with the rules in Part 2 of GENPRU 3 Annex 2, as adjusted by Part 3 of that annex.
For the purposes of BIPRU 13.6.33 R:(1) in the denominator, EPE must be used as if it were a fixed outstanding amount;(2) a firm must be able to demonstrate that its internal estimates of capture in the numerator material sources of stochastic dependency of distribution of market values of transactions or of portfolios of transactions across counterparties;(3) internal estimates of must take account of the granularity of portfolios.[Note: BCD Annex III Part 6 point 12 (part
A firm must ensure that the numerator and denominator of are computed in a consistent fashion with respect to the modelling methodology, parameter specifications and portfolio composition. The approach used must be based on the firm's internal capital approach, be well-documented and be subject to independent validation. In addition, a firm must review their estimates on at least a quarterly basis, and more frequently when the composition of the portfolio varies over time. A
A firm must have the systems capability to estimate EE daily if necessary, unless it is able to demonstrate to the appropriate regulator that its exposures to CCR warrant less frequent calculation. The firm must compute EE along a time profile of forecasting horizons that adequately reflects the time structure of future cash flows and maturity of the contracts and in a manner that is consistent with the materiality and composition of the exposures.[Note: BCD Annex III Part 6 point
(1) This paragraph sets out guidance on BIPRU 4.6.2 R so far as it relates to the boundary between retail exposures and corporate exposures.(2) In deciding what steps are reasonable for the purposes of BIPRU 4.6.2 R (1), a firm may take into account complexity and cost, as well as the materiality of the impact upon its capital calculation. A firm should be able to demonstrate to the appropriate regulator that it has complied with the obligation to take reasonable steps under BIPRU
Table: Formulae for the calculation of expected loss amountsThis table belongs to BIPRU 4.6.47 RExpected loss (EL)equals PD×LGDExpected loss amountequals EL×exposure valueFor defaultedexposures (PD = 1) where a firm uses its own estimates of LGDs, EL must be ELBE, the firm's best estimate of expected loss for the defaultedexposure according to BIPRU 4.3.122 R.For exposures subject to the treatment set out in BIPRU 4.4.79 R (Double default) EL must be 0.[Note:BCD Annex VII Part
A firm'sfinancial resources requirement will be recalculated annually when its fourth quarterly financial return is prepared. The firm must maintain financial resources sufficient to meet its new financial resources requirement from the date on which the fourth quarterly financial return is prepared and no later than 80 business days after the firm’saccounting reference date. The expenditure based requirement applicable at the accounting reference date will be based on the four
The amount of additional capital resources that a firm must hold as a result of an exclusion under IPRU-INV 13.1.21R1 must1 be calculated by referring to the firm's relevant income in the following table: Relevant income £000s Minimum additional capital resources more than up to £000s (Notes 1 and 2) 0 100 5 100 200 12 200 300 18 300 400 21 400 500 23 500 600 25 600 700 27 700 800 28 800 900 30 900 1,000 31 1,000 1,500 37 1,500 2,000 42
The amount of additional capital resources that a firm must hold where the policy's excess on any claim is more than £5,000 must be calculated by referring to the firm's relevant income and excess obtained in the following table: All amounts are shown in £000s (Notes 1 and 2) Relevant income is Excess obtained, up to and including more than up to 5 10 15 20 25 30 40 50 75 100 150 200+ 0 100 0 4 7 9 12 14 18 21 28 34 45 54 100 200 0 7 11 14 17
Firms are not expected to include in their EAD/CF estimates the probability of increases in limits between observation and default date. If the reference data set includes the impact of such increases, the FCA expects firms to be able to adjust their estimates accordingly with the aim of assessing what the exposure would have been at default if the limit had not been increased.
1A firm must calculate its own funds and liquid capital as shown below, subject to the detailed requirements set out in IPRU-INV 5.8.2R.Financial resourcesCategoryIPRU-INV 5.8.2R paragraphTier 1(1)Paid-up share capital (excluding preference shares) A(1A)Eligible LLP members' capital (2) Share premium account (3) Reserves 2A(4) Non-cumulative preference shares Less: (5) Investments in own sharesB(6) Intangible assets (7) Material current year losses 4(8)Material holdings in
1 Deductions and Ratios (Items 10, 11 and 15)(a)Notwithstanding IPRU-INV 5.8.1R and 5.8.2R for an exempt CAD firm, in calculating own funds, all of Item 8 must be deducted after the total of Tier 1 and Tier 2 capital and the following restrictions apply:(i)the total of fixed term cumulative preference shares (item 10) and long-term qualifying subordinated loans (item 11) that may be included in Tier 2 capital is limited to 50 per cent of Tier 1 capital;(ii)Tier 2 capital must
(1) A firm must calculate its interest rate PRR under BIPRU 7.2 by:(a) identifying which positions must be included within the interest rate PRR calculation;(b) deriving the net position in each debt security in accordance with BIPRU 7.2.36R-BIPRU 7.2.41R;(c) including these net positions in the interest rate PRR calculation for general market risk and the interest rate PRR calculation for specific risk; and(d) summing all PRRs calculated for general market risk and specific risk.(2)
A firm's interest rate PRR calculation must:(1) include all trading bookpositions in debt securities, preference shares and convertibles, except:(a) positions in convertibles which have been included in the firm'sequity PRR calculation;(b) positions fully deducted as a material holding under the calculations under the capital resources table, in which case the firm may exclude them; or(c) positions hedging an option which is being treated under BIPRU 7.6.26R (Table: Appropriate